ANTI-LOCK BRAKING SYSTEM (ABS) with brake manual adjuster
Battery with longtail Pipe 65D23L x 2
Steel wheels 15''
Lockable fuel tank cap
Reverse Warning Buzzer
water separator in fuel line
Laminated wind shield glass
-(BODY CONSTRUCTION DETAILS (STEEL BOX) :
Box External Length : 4,300mm
Box External Width : 2,100mm
Box External Height from floor : 2,100mm
Body Construction : All welded steel construction to specification ASTM or Equivalent.
Body Frame : 80x40x2mm, 50x50x2mm MS Hollow tube and 40x40x2mm MS Hollow Tube with flat roof type
Body Claddings : External 1.8mm/2.0mm MS Sheet for left, right, front, rear and roof cladding will be used as external cladding.
Floor and Mounting Mechanism : Heavy 100x50x5mm Channel as sub frame and 100x50x4mm Section Channel as a Side/Front & Rear Raves with formed channel 100x50x4mm as cross members covered by 4mm MS PLAIN SHEET as the flooring. Base will be supported with gussets and brackets to sustain heavy vibrations and increase durability.
Door : One (1) double leaf door AT rear side will be provided. Made up of 40x40x2mm Hollow tube with one locking system on the right side. G.I. Container type hinges will be used, and T holders will be provided on the doors to hold it in the 270-degree angle.
Side Guards :80x40x2mm Hollow tube / Channel as per UAE standard.
Body Edges : Edges will be covered with 40x40x2mm Aluminum Angle and outside aluminum side skirting will provided.
-(ELECTRICAL SYSTEMS) :
Lights :Original Rear lights and rear signal lights will be used.
Wiring :Original chassis wiring will not be altered only supply wiring will be added for the mechanical and electrical accessories
Supply :Original chassis battery will be utilized
Reflective traffic stickers on the side guard will be provided
Rear Bumper with reflective stripe will be provided
4 pcs triangle reflector on each side of the box will be provided.
One (1) coat of epoxy primer and Two (2) coats of finish paint in single color of customers choice.