Hino 300 XZU 710L 6.5 TON 300S Wide cab 4X2 #XZUJ3

  • CAB Type : Forward control, all steel welded construction, high roof
  • Front windshield : Heat-absorbing laminated glass
  • Front seat : 4-way adjustable driver seat, fixed back passenger seat Integrated type
  • Seat cover : Vinyl type
  • Front seat belt : 3-point ELR (Emergency Locking Retractor) belt on driver and outer passenger seat, 2-point NR (Non Retractor) belt on center passenger seat
  • Floor mat : Vinyl type
  • Sun visor (both sides)
  • Cab trim (quarter panel) : Semi trim
  • Instrument panel center cluster : Dark grey color
  • Door pocket (both side)
  • Seat back pocket (pocket for driver seat)
  • Grab handle (interior) : Equipped (driver 1 + passenger 1)
  • Outside rear view mirrors : Convex type, long stay
  • Inside mirror
  • Windshield wiper : 2-speed with wash and intermittent feature
  • Front heater and defroster (with warm up switch)
  • Room light (reading light only)
  • Door courtesy switch : Driver side
  • Cigar lighter
  • Cup holder
  • Tool set
  • Hydraulic jack
  • Radiator grille : Cab colored type
  • Speedometer : Equipped (km/h)
  • Multi-information : Equipped
  • Tachometer : Equipped (r/min)
  • Coolant temperature gauge : Equipped (with buzzer)
  • Fuel gauge
  • Brake warning : Brake fluid level and vacuum pressure warning lamp and buzzer
  • Cab to axle center : 2,875
  • Front overhang : 1,115
  • Rear overhang (at frame end) : 1,575
  • Front chassis height : 730
  • Rear chassis height : 800
  • Road clearance (at front axle) : 210
  • Front tread : 1,655
  • Rear tread : 1,520
  • Turning radius on tire : 6,200
  • Turning radius wall to wall : 6,900
  • Gradeability tanθ (%) : 36.4
  • Transmission gear ratio ( :1) : 1st (5.342), 2nd (2.975), 3rd (1.604) , 4th (1.000), 5th (0.712 ), Rev. (4.970)
  • Rear axle : Gear ratio ( :1) : 5.571
  • Engine Type : Diesel, turbocharged and intercooled, 4-cycle, in-line 4-cylinder, overhead valve, water-cooled
  • Combustion system : Compression Ignition, Four stroke
  • Bore x Stroke : 104 x 118 mm
  • Piston displacement : 4.009 L
  • Compression ratio : 18.0 : 1
  • Fuel injection pump : Electronic control common rail type with altitude compensation
  • Air cleaner and intake : Behind cab mounted half-height snorkel air intake with air filter, dry paper element
  • Exhaust tail : Short tail type
  • Engine revolution control : Equipped (instrument panel mounted rotary knob type)
  • Clutch Type : Dry single plate with damper springs, facing outside diameter 300 mm, automatic gap adjuster
  • Transmission Model : RE50, manual 5-speeds, with overdrive
  • Transmission shift lever : Folding type
  • PROPELLER SHAFT : Tube outside diameter x thickness (82.6 x 2.3 mm)
  • FRONT AXLE Type : Reversed Elliot, " I " section beam
  • REAR AXLE Type : Full-floating, single reduction, single speed by hypoid gearings
  • Front wheel brake : Drum inside diameter 320 mm, lining width 100 mm
  • Rear wheel brake : Drum inside diameter 320 mm, lining width 115 mm
  • Exhaust brake
  • LSPV (load sensing proportional valve)
  • PARKING BRAKE Type : Mechanical, internal expanding acting on transmission
  • STEERING Type : Telescopic and tilt steering column, recirculating ball integral power steering
  • FRONT SUSPENSION Type : Semi-elliptic leaf springs with double acting shock absorbers
  • REAR SUSPENSION Type : Semi-elliptic main and auxiliary leaf spring with double acting
  • WHEEL AND TIRE
  • Tire size : Front and rear : 7.50R16 10PR, rib type tread (16 x 6.00GS wheel)
  • Fuel filter : Primary (with water separator) and secondary filter
  • Fuel filler : Small-diameter neck
  • CHASSIS FRAME Type : Ladder-shaped channel section side rails
  • Front bumper : Dark grey type (resin)
  • Front underrun protector
  • Tow hook (front)
  • All Pictures shown are for illustration purpose only Specifications may change without prior notice.
  • This vehicle available in Different colors